Galil Motion Control

PICS, Inc. carries Galil Motion Control products, offering full-featured, easy-to-use and cost-effective motion controllers that work with both step motor and servo motor systems.  DC powered servo amps can be supplied with some of the controllers for an extremely cost-effective package. The technology has been applied to develop a small, pocket-sized PLC, the RIO.  The programming language consists of simple alpha-numeric commands.  Galil Motion Control solves applications requiring point-to-point positioning, position tracking, jogging, linear and circular interpolation, contouring, electronic gearing, and ECAM.

Accelera Controllers & Drives

DMC-40x0

This device is Galil’s highest performance, stand alone controller. The motion controller belongs to the latest generation motionAutomated Motion Controls
controller family: the Accelera Series.  The Accelera series is above all its predecessors in all accounts of update rates and commands.

  • Completely user configurable for stepper or servo motors on any combination of axes
  • Sinusoidal commutation is configurable
  • Up to 22MHz encoder frequencies for servos
  • Up to 6MHz output pulses for steppers
  • Non-volatile memory for programs, arrays, and variables
  • Up to eight programs can be run through multitasking option

DMC-18x6

This is one of Galil’s highest performance, the PCI bus motion controller. Just like the DMC-40x0, it belongs to the same family: the Accelera Series. The Accelera series is a competitive motion controller that functions much better than all of its predecessors.DMC-18x6

  • Completely user configurable for servo or stepper motors on any combination of axes
  • Up to 22MHz encoder frequencies for servos
  • Up to 6MHz output pulses for steppers
  • The command processing is as low as 31 microseconds per axis
  • Up to eight programs can be run through multitasking option

 

Econo Controllers & Drives

DMC-41x3 Econo Series

This controller offers more than the model just below it to fit applications that require a higher performing motion controller.DMC-41x3

  • Completely user configurable for servo or stepper motors on any combination of axes  
  • Up to 15MHz encoder frequencies for servos
  • Up to 3MHz outputs for steppers
  • Up to eight programs can be run through multitasking option

DMC-18x2 Econo Series

The DMC-18x2 series is designed for applications that are cost sensitive. It is able to accommodate 1- through 4-axis formats and allows control of step or servo motors on any combination of axes.

  • Completely user configurable for servo or stepper motors on any combination of axes
  • Up to 12MHz encoder frequencies for servos
  • Up to 3MHz outputs for steppers
  • Up to eight programs can be run through multitasking option

 

Single-Axis Controllers & Drives

DMC-300xx Pocket Motion Controller Series

The newest 32-bit RISC processor runs at a higher speed than older models. It is available in two different models: the box model and the card model.

  • Single-axis motion controller with optional stepper or servo motor drive in compact housingDMC-300xx
  • Execution of four programs
  • Card-level or box-level
  • Can connect to servo or stepper amplifier of any power range
  • CDS-3310 Ethernet/RS232
  • DMC-14x5 Ethernet/RS232

 

Pocket PLC

RIO-471x0 Pocket PLC

This is a very efficient device that is cost effective and fitted into a compact housing. The RIO has a processor that can handle I/O logic and is programmed using Galil’s intuitive command language or using Galil’s ladder interface software. Pocket PLC

  • Eight analog inputs
  • Eight analog outputs
  • 16 optically isolated inputs and outputs
  • Four programs can be executed with multitasking

 

Motors & Power Supplies

  • PSR Switching Power Supplies
  • Brushless Servo Motor

Interested in Galil Motion Control Products? Request a quote from PICS, Inc. today!

Click here to submit a Request for Quote
or call us today at 610.644.7701